With it’s three different assembly solutions, it is a good choice to cope wih narrowness which is a big problem for elevator systems. It’s assembly is easy and also it enables to be placed into the shaft without machine room.
Noise level is under 50 db., and vibration value is 0.7 mm/sec.
It saves energy, using the motor with lower power owing to the high efficiency.
It does not need maintenance owing to the special synhentic lubricant which increases productivity and working life of the worm and gear group.

Technical Information

MACHINE TYPE	LOAD(Kg)	SPEED     (m/sn)	ROPPING	MOTOR POWER (PS/kW)	PULLEY	ROPE BETWEEN THE CENTER  (mm)	CONTROL TYPE	RATIO	TRAVELLING HEIGHT
ACR135	320	0,63	1:1	4,8 / 3,5	440 4×10	17	AC2	57/1	20 (45*)
		0,80	1:1	4,8 / 3,5	440 4×10	17	AC2	44/1
		1,00	1:1	4,8 / 3,5	480 4×10	17	AC2	36/1
	400	0,63	1:1	5,5 / 4	440 4×10	17	AC2	57/1
		0,80	1:1	5,5 / 4	440 4×10	17	AC2	44/1
		1,00	1:1	6,7 / 5	480 4×10	17	AC2	36/1
	480	0,63	1:1	6,7 / 5	440 5×10	17	AC2	57/1
		0,80	1:1	6,7 / 5	440 5×10	17	AC2	44/1
		1,00	1:1	6,7 / 5	480 5×10	17	AC2	36/1
	630	0,63	1:1	7,5 / 5,5	440 5×10	17	AC2	56/1
		0,80	1:1	7,5 / 5,5	440 5×10	17	AC2	44/1
		1,00	1:1	10 / 7,5	480 5×10	17	AC2	36/1
ACR135	320	1,00	1:1	5,5 / 4	480 4×10	17	3VF	36/1
		1,20	1:1	5,5 / 4	440 4×10	17	3VF	55/2
		1,60	1:1	7,5 / 5,5	440 4×10	17	3VF	43/2
	400	1,00	1:1	5,5 / 4	480 4×10	17	3VF	36/1
		1,20	1:1	7,5 / 5,5	440 4×10	17	3VF	55/2
		1,60	1:1	10 / 7,5	440 4×10	17	3VF	43/2
	480	1,00	1:1	7,5 / 5,5	480 5×10	17	3VF	36/1
		1,20	1:1	7,5 / 5,5	440 5×10	17	3VF	55/2
		1,60	1:1	10 / 7,5	440 5×10	17	3VF	43/2
	630	1,00	1:1	10 / 7,5	480 4×10	17	3VF	36/1
Max.Static Load = 3000 Kg

(*) balanced elevator

Sample Constructions

1st. Mounting Type

2nd. Mounting Type

3rd. Mounting Type

Technical Photos

1st. Mounting Type

2nd. Mounting Type

3rd. Mounting Type